Logo CINOGY Technologies

IR Beam Profiler
..............................


LaserDec CL200

LaserDec CL500

LaserDec CR200
..............................

Attenuation Unit 90°

Attenuation Unit 0°

IR Beam Reducer

Microscope Objective
..............................

Downloads
 

Attenuation Unit 90°

Line

The attenuation units are add-ons to the LaserDec CL Beam Profilers. They are based on a zinc selenide (ZnSe) beam splitter and can be mounted in four positions on the LaserDec aperture. They are designed for a 45° angle of incidence and can be used up to intensities of 5kW/cm2.

Attenuation Unit 90° Reflection

The absorbed heat is dissipated by cooling water whereby thermal lens effects are eliminated. The water-cooling allows the utilization of lasers up to powers of 3kW. To avoid interference patterns the beam splitter is designed with a wedge angle.

 

 

Polarization-dependent

Polarization-independent

 

 

AU-SP-90

AU-33-90

AU-50-90

Spectral range:

 

10.6µm

10.6µm

10.6µm

Reflection rates:

 

RS=28% / RP=7.8%

R=33.3%

R=50%

Aperture:

 

Ø=26mm

Ø=26mm

Ø=26mm

Power (Pmax) CL200:

 

700W (RS) / 2.5kW (RP)

600W

400W

Power (Pmax) CL500:

 

1.7kW (RS) / 3kW (RP)

1.5kW

1kW

Intensity (Imax):

 

5kW/cm2

3kW/cm2

3kW/cm2

LaserDec with Attenuation Unit LaserDec with Attenuation Unit

Home

Imprint

General Conditions

References

Contact

© CINOGY Technologies GmbH 2017