Beam reducer for laser beam analysis: CINOGY Technologies

UV-NIR Beam Profiler
..............................

CinCam CCD

CinCam InGaAs

CinCam CMOS
..............................

CinSquare M² Tool

CinSpot Tool

CinLine Tool

Near Field Tool
..............................

IR Module / Coating

UV Coating

Neutral Density Filter

Prism Attenuator

Beam Reducer
..............................

Downloads


	Beam Reducer



	The beam reducer objective is an add-on to the standard CinCam Beam Profiler. It is designed for adjusting the laser beam size precisely to the effective area of the Beam Profiler. Thereby, the reduction factor and the measurement plane are calibrated.


	The beam reducer offers high performance optical designs packaged in a precise opto-mechanical platform. The input aperture allows beam profiling of lasers with diameters up to 12mm with CINOGY’s CinCam systems.

		BR-UV/VIS-01	BR-VIS/NIR-01	BR-NIR-01
Spectral response:		350-700nm	650-1080nm	1040-1650nm
Ratio:		2x; 3x, 4x	2x; 3x, 4x	2x; 3x, 4x
Free aperture:		22mm	22mm	22mm
Beam diameter (1/e²):		max 12mm	max 12mm	max 12mm
Damage threshold:		0.4J/cm² (@ 10ns, 532nm) 300W/cm²	2J/cm² (@ 10ns, 810nm) 500W/cm²	2J/cm² (@ 10ns, 1550nm) 300W/cm²
Calibration:		Reduction factor Measurement plane	Reduction factor Measurement plane	Reduction factor Measurement plane
Lens:		Achromatic lens	Achromatic lens	Achromatic lens

General Conditions


	© CINOGY Technologies GmbH 2019