Logo CINOGY Technologies

UV-NIR Beam Profiler
..............................


CinCam CCD

CinCam InGaAs

CinCam CMOS
..............................

CinSquare M² Tool

CinSpot Tool

CinLine Tool

Near Field Tool
..............................

IR Module / Coating

UV Coating

Neutral Density Filter

Prism Attenuator

Beam Reducer
..............................

Downloads
 

CinSquare M² Tool

Line

Industrial Solution - Beam Quality Measurement

The CinSquare system CS200/CS300 is a compact and fully automated tool to measure the beam quality of cw and pulsed laser systems from the UV to NIR spectral range. This system consists of a fixed focusing lens in front of a motorized  translation stage carrying the camera-based CinCam beam profiler. Its operational robustness and reliability ensures continuous use applications in industry, science, research and development.

According to ISO 11146-1/2 the CinSquare system measures the complete beam caustic and determines M², waist position, divergence, etc., related to the reference plane. To facilitate its use, the CinSquare system is equipped with two alignment mirrors for exact positioning of the laser beam and a filter wheel for incremental beam attenuation.

Spectral response:

 

250-1800nm (depends on sensor)

Technology:

 

CCD / CMOS / InGaAs

Beam diameter (1/e2):

 

0.5-10mm

Default:

 

up to 6 ND filters and up to 6 lenses pre-assembled

Input power:

 

up to 20W (modular attenuator)

Accuracy:

 

2-3% typical / 3-5% waist size / position etc.

Software:

 

RayCi-Pro

CinSquare CS200-CS300

- ISO 11146-1/2 conform
- Robust and compact measurement tool in industrial design (24/7)
- Camera-based system without scanning slit technique
- Fully automated beam quality measurements in <1 minute / ~30s fast scan
- New ‘CinCal’ algorithm for highest measurement accuracy
- M², Divergence, Beam waist diameter and location, Rayleigh length
- 2D- and 3D-Caustic-Fit for visualizing beam quality parameter

Beam Caustic

Home

Imprint

General Conditions

References

Contact

© CINOGY Technologies GmbH 2019